Bullseye Installation Jig

BULL

This mortise jig will assist installers with drilling wood or metal doors. The tool is completely self-contained besides a 3/32″ Allen wrench to change bore sizes. Check out these great features:

• 2-1/8″ Face Bore (Standard)
• 2-3/8″ or 2-3/4″ Backset (built in tabs change from one to the other instantly!)
• 1/8″ pilot holes at 12 & 6 o’clock positions for levers using 2-3/4″ spacing for through bolts
• Optional reducer bushings available for 1-1/2″
• Optional interconnecting straps to set up proper spacing for a second Bullseye for interconnected locks
• Works with door thicknesses from 1-1/4″ to 2-3/4″

NOTE: Included with your Bullseye is a 3/32” allen wrench and two 10-32×3/8 allen screws. These will only be used if you purchase and install the optional 1-1/2” reducer bushings.

BLSH032

1-1/2″ Reducer bushings for Bullseye

Technical Info:

• Material: Anodized aluminum with steel bolts
• Dimensions: 7″ W x 6.5″ D x 3″ H
• Weight: 3 lbs.