SFIC Pinning / Capping Block

CPB1

Another great tool from Framon Manufacturing for locksmiths who use interchangeable core. The CPB1 comes with a pinning / capping block, ejecting pin and capping tool. Insert the core into the tool and eject the old pins quickly and easily. Flip the block over to load the chambers and cap the core. Made in the USA. Available through Framon Manufacturing or your distributor.

Kaba Peaks Pinning / Capping Block

CPB140

A great tool for locksmiths using Kaba Peaks .140 cylinders. The CPB140 comes with a pinning / capping block, ejecting pin and capping tool. Insert the core into the tool and eject the old pins quickly and easily. Flip the block over to load the chambers and cap the core. Made in the USA. Available through Framon Manufacturing or your distributor.

Additional Info:

CPB1 Instructions

6 Pin Capping Tool

CBCAP6

Add the CBCAP6 to your arsenal (works with the CPB1 Tool) and cap an entire core with one blow of the hammer. Load all of your chambers, insert your caps and drive them in place with this handy addition. Made in the USA. Available through Framon Manufacturing or your distributor.

7 Pin Capping Tool

CBCAP7

Add the CBCAP7 to your arsenal (works with the CPB1 Tool) and cap an entire core with one blow of the hammer. Load all of your chambers, insert your caps and drive them in place with this handy addition. Made in the USA. Available through Framon Manufacturing or your distributor.