Sidewinder 2 High Security Key Duplicator & Code Machine

Lexus Cutter
We now offer a new cutter that will make cutting Lexus, Kia, and Hyundai keys even easier. Instead of using two blanks to originate one code key on the Sidewinder 2, the new GHCB093LS allows you to cut vertically in each position. This prevents overrun on the adjacent side of the key experienced on Lexus short. The new cutter comes in a pink tube making it easily identifiable in the drawer. The cutter is designed only to cut vertically and should not be used to duplicate keys. The first time the cutter is ordered a special setup key is also required; GHCB093LSKEY. Contact Framon for more information.


Download the Sidewinder 2 catalog page by clicking here

The Sidewinder 2 has generated more interest & anticipation than any other key machine we’ve ever produced! A low-cost alternative to computer driven key machines, the Sidewinder 2 can originate VW, Honda, Lexus Long & Short, Chevrolet, Ford, and Hyundai/Kia 4 Track keys out of the box and duplicate just about any high security key in use today. Additional code kits can be purchased separately. A card is included with the SD2-LX for an additional kit of your choice after purchase.


February 2015 National Locksmith Review of the Sidewinder 2

View the latest National Locksmith Review of our Sidewinder 2!

Duplicate Almost Any High Security Key In Use Today

A sampling of the keys you can duplicate on the Sidewinder 2:

Mercedes 2 & 4 Track
Lexus long & short
VW / Audi
Kia / Hyundai
Ford Fiesta

NEW! Seven cutters and three guides included at time of purchase! VW/Audi Vises Also Included!

The Sidewinder 2 includes two each of our 5/32″ cutter, 3mm cutter, and 3/32″ cutter as well as their respective guides. Our GHCB093LS cutter is now included in the SD2-LX7 package. Volkswagen & Audi vises are included as well as the standard set of vises. With this combination you can duplicate all of the keys mentioned above.

Change From Duplication To Code Cutting In Seconds

The Sidewinder 2 uses depth & space “rods” which can be engaged in about 15 seconds when you want to code cut. Simply tighten the knurled thumb screw to engage the rod.

Code Cut Volkswagen/Audi, Honda, Lexus Long & Short, GM, Ford, and Hyundai/Kia 4 Track Out Of The Box

The Sidewinder 2 comes with everything you need to code cut all of these keys at time of purchase. Depth & space rods are easily changeable. Switching from one manufacturer to another takes about one minute and requires no adjustment to the rods.

Receive Genericode ME Free With Machine Purchase!

A form is included with the Sidewinder 2 to receive our full version of Genericode ME. Simply send in (or fax over) the form & proof of purchase and you’ll be sent a copy of Genericode ME within seven days!

Code Kits

Sidewinder 2 Code Kits
Kits in BOLD are included with the SD2- LX7 package
GHMS751 Chevrolet/Saturn
GHMS752 Lexus Long/Short
GHMS753 Infiniti
GHMS754 Honda
GHMS755 VW/Audi
GHMS756 Mercedes 4 Track
GHMS757 Hyundai / Kia
GHMS758 BMW 4 Track
GHMS759 Saab BC & 2S1
GHMS760 Subaru
GHMS761 Fiat
GHMS762 Ford Fiesta
GHMS764 BMW 2 Track
GHMS765 Lexus 80000 Series
GHMS775 Tibbe Fixture
GHMS766 Hyundai T/C Two Track Kit
GHMS767 Chevy Captiva / Pontiac G8 Kit
GHMS768 Opel / Pontiac GTO Kit


Common Part Numbers


Hand Held Tip Stop
GHCB093 3/32″ Cutter (smallest)
GHCB093LS 3/32″ Cutter For Lexus/Kia/Hyundai Only (Plunge)
GHCB3M 3mm Cutter (middle size)
GHCC156 5/32″ Cutter (largest)
GHMS093 3/32″ Guide (smallest)
GHMS3M 3mm Guide (middle size)
GHMS156 5/32″ Guide (largest)
GHMS461 Plastic Chip Guard

Standard A/B Vise Set