by neighborhub | Sep 29, 2016
Framon Code Machine Accessories Optional Accessories For The #1, #2 or #2D Code Machine SPACING BLOCK RACK The rack holds six Framon spacing blocks securely. Blocks snap in and out of the rack in seconds. Two mounting screws provided to attach the rack to your code...
by neighborhub | Mar 9, 2016
DC-300 Parts Page Part Number Description DBMS051 Yoke Knob DC9040 Cutting Wheel DCMS251 Nylon Brush DCMS252 Wire Brush DCMS401 5/16″” Allen Wrench DCMS402 3/32″” Allen Wrench DCMS410 Brass Shim DCMS551 Tip Stop DCMS603 Rubber Bumper DCMT002...
by neighborhub | Mar 9, 2016
Sidewinder Cutters & Accessories Optional Accessories For The Framon Sidewinder GHMS461 – Chip Shield For The Sidewinder Easily attaches to any Framon Sidewinder; the shield will deflect chips away from the user. To install, simply remove one screw &...
by neighborhub | Mar 9, 2016
GUIDE FOR THE DBM-1 The rotating guide for the DBM-1. Part No. DBSH113 BRUSHES FOR THE DBM-1 – AVAILABLE IN NYLON OR WIRE These brushes replace a worn one. The DBM-1 is equipped with a wire brush – a nylon brush can be substituted if you prefer. Wire Brush – Part...
by neighborhub | Mar 9, 2016
TKM-100 Cutters And Accessories CUTTER Carbide cutter for the TKM-100. Part No. TCA1001 SPACING PLATES The seven spacing plates that are included with the machine at time of purchase. Ace Plate TKMS102 Offset Right Plate ...
FixMe.IT
