Kwikset Titan/Ultramax Bypass Tool

The Bypass Tool (BYP2) allows you to remove the cylinder from a Kwikset Grade 2 door knob. When the control key is lost, your only option until now was to attempt to pick or impression the

SPACING BLOCK RACK
The rack holds six Framon spacing blocks securely. Blocks snap in and out of the rack in seconds. Two mounting screws provided to attach the rack to your code machine.

PART #: F2SH750 – For the #1 & #2 Only

#6 Spacing Block For Framon #1 Or #2

Spacing block #6 is now available for the Framon #1 & #2 Code Machine. The new block has spacings for the Toyota & GM 10 cut series, as well as Kia Y7001-8200 and ten others. PART NO. F2MSSB6 – For The Framon #1 & #2.

DOUBLE SIDED VISE
This vise will hold the wide, deeply milled blanks such as X160, X161, X176 and X184 that tend to tip in the standard vise. The reverse side of the vise has a built-in tip stop and special millings to hold all of the interchangeable core keys firmly. The vise eliminates the need for shims and wires to hold these blanks. Fits Framon #1 or #2 Code Machines. PART NO. F2SH050 – For The #1, #2, & #2D

SPACING BLOCK SET FOR DOMESTIC AND IMPORT SPACING
72 different spacings from .045″ to .170″. Includes new Toyota 10 cut (50001-69999 code series) as well as Ford 10 wafer spacing and VB series with double cuts. These blocks snap in and out of the spacing block holder and fit all existing Framon Code Machines. Also included is a new spacing clip for tip-stopped keys. PART NO. FSB1001 – For The #1 & #2 Only

SPACING BLOCK SET FOR SAFETY DEPOSIT BOX KEYS
Offered in three different kits: The F2MSDB1 includes three safety deposit blocks with spacing for Diebold, Mosler, HHM, S & G, York, etc. The F2MSDBC2 includes the blocks plus .055″, .066″ and .088″ high speed steel slotters. The F2MSDBC3 includes the blocks and  carbide slotters.
For The #1 & #2 Only

MEDECO KEYMARK VISE
A special vise is needed to hold & cut Medeco KeyMark keys. Due to the varied angles on the legs of the KeyMark keys, we suggest that you send a blank in before purchasing the vise.  Part Number F2SH065 – For The #1, #2, & #2D

TIBBE KEY ATTACHMENT
An attachment for cutting Tibbe keys. This unit will fit all Framon Code Machines and comes complete with a .088″ carbide slotter and instructions for use. This unit will cut both the 6 and 8 wafer Tibbe keys that are used on Ford and Jaguar autos. These keys can now be cut quickly and accurately at a very low cost to Framon Code Machine owners. NOTE: The fixture will NOT cut the large head original Jaguar keys.  PART NO. F2SH070 – For The #1 & #2 Only

DEPTH & SPACE MANUAL – VOLUME  17, August 2012
This edition contains depth and space information for domestic, import, flat steel keys and safety deposit keys. It’s the largest and most comprehensive depth and space manual available. Newly formatted in 1996, the Depth & Space Manual gives progressive spacings as well as spacing block reference numbers. PART NO. F2MS350 (If your binder is in good shape, save money & order the filler pages only: PART NO. F2MS355)

FRAMON REPLACEMENT PARTS