New Tip Stop Information

Any information on this page assumes that you have the newer tip stop. A new stop was needed to accommodate the seven-pin interchangeable core key. To determine which stop you have, measure the length of the I/C stop. It should measure approximately .160".

Three Ways To Align Shoulderless Keys On The Framon #2

Key Aligned Using Best Spacing

Key Aligned Using Flat Spacing

You may notice that there is no Ford 10-pin spacing anymore. Flat spacing the key and changing the starting position on the first cut makes things a little simpler.

Click here to go back to our home page...

This page was last updated Monday, March 07, 2005