Manufacturer:Saturn Depths Series: 0001X-2000X 1-.315 Models: Various 2-.290 Blanks: 3-.265 Cuts Start At: .216 4-.240 Spacing: .092 Block #: 3 Incr.: .025 No. Of Spaces: 10 Spaces:.216, .308, .400, .492, .584, .676, .768, .860, .952, 1.044 Bitting is double, same both sides. Using spacing clip, align tip of key with left side of vise. Lay spacing clip FLAT on left side of vise and slide key in from the right. See drawing below.NOTE: The new Saturn models only use positions 2-10 in the lock cylinders, but codes do show 10 positions. Earlier releases showed a starting cut at .308, eliminating the first cut on the key. Be sure to add the first cut even though it is not needed. In addition, the letter X in the code series is dropped on dealer invoices, showing only a four digit number.
This page was last updated
Framon Manufacturing Company, Inc. Alpena, MI 49707
