GM 10-Cut Depth & Space Chart

NOTE: This series is also used for the new 2000 GM H, O, and S code series.

Manufacturer: General Motors		Depths
Series: A000-ZZ99,H,O,S			1-.315
Models:	Various			2-.290
Blanks:	P1102 Etc.			3-.265
Cuts Start At: .216			4-.240
Spacing: .092			
Block #: 3			
Incr.: .025				
No. Of Spaces: 10			
Spaces:	.216, .308, .400, .492, .584, .676, .768, .860, .952, 1.044	
Bitting is double, same both sides.
Using spacing clip, align tip of key with left side of vise. Lay spacing
clip FLAT on left side of vise and slide key in from the right. See 
drawing below.	

Framon Manufacturing Company, Inc. Alpena, MI 49707