The Total Code Retrieval System
Genericode™ Main Program Screen
More than just a code lookup program, here is what you get included with Genericodeä:
 | General Code Program: lookup key information from a code number |
| Utility / Vehicle / Motorcycle / Padlock Programs: lookup key information by manufacturer, model, and input codes or cuts |
| Key Blank Search: Don’t know the manufacturer? Find out if you know the blank number. |
| Depth & Space Program: Lookup depth & space information for virtually any lock in use today. |
| Information Program: A directory of companies, both foreign and domestic, involved in the locksmith trade. |
| Locksmith Ledger Index: Find articles by subject dating back to 1985. |
| Progression Program: Displays a chart to progress keys when only partial cuts are known. |
Information Program Searches Manufacturers, Distributors, Schools, Etc.
Genericodeä runs on Windows 3.1, Windows 95, 98, 2000 and XP. 35 MB of hard drive space is required. Genericodeä runs from Windows in a DOS window (restarting the computer in MS-DOS mode is not required).
When
looking up a code number, the screen shown below gives you all of the
information you need to cut the key. Information for cutting the key is given
for the following machines: Framon #1, #2, DC-300, A-1’s Pak-A-Punch, ITL,
Ilco Exacta, Curtis Clipper, HPC 1200, 1200PCH, & Codemax.
Key blank
information is shown for the following manufacturers: Ilco Standard, X, E-Z,
Dominion, Curtis, Jet, Star, ESP, Borkey, Silca, Orion, and Original.
In addition, Genericodeä displays the keyway and cut key profile. If information is available in Reed or Baxter codebooks, the volume is given.
Some code programs boast of their numbers of codes included, claiming over two million; Genericode contains over 750,000 codes for combination padlocks alone! Add to that over 200,000 codes for ten cut GM and over 100,000 for ten cut Ford; doesn’t two million seem a little light? Genericode contains well over 4500 code series; ask others how many they have…
Genericode™ Progression Screen
Other companies are happy to sell
you a code retrieval program, another program for progression charts, and
another for missing cuts. Genericode gives you all of these programs at once,
and you can run any of them out of the same window.
Genericode
Key Cutting Screen
Genericodeä
carries a suggested dealer price of $695.00. Contact your distributor or Framon
Manufacturing Company today for more information.
We at Framon have recommended this program to our machine users for years; now we’re happy to be able to offer it to you as part of our product line.
Part numbers: Genericodeä for DOS - GCODE
Click here to go to the Genericode DOS support site
This page was last updated