Framon Logo

Framon #2J Code Machine

Framon 2J

To download the FRA-2J catalog page, click here

The Renowned #2 Code Machine Modified For Detention Use...

The Framon #2J packs all of the features and benefits of the Framon #2, and adds everything you need to cut Folger Adam, Mogul, Southern Steel, and Adtec keys. A special vise is included with the machine to clamp the larger keys. An extension is added to the spacing crank to avoid interference with the head of these larger keys. When you choose the #2J, you enable yourself to originate almost any cylinder key in use today, including detention keys. Here's just a few of the keys you'll be able to cut with the #2J:

 

bulletDetention Keys: Adtec, Folger Adam, Mogul, Southern Steel

 

bulletStandard Cylinder: Arrow, Corbin, Kwikset, Lockwood, Russwin,
Sargent, Schlage, Weiser, Weslock

 

bulletDomestic Automotive: Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Lincoln, Mercury, Oldsmobile, Plymouth, Pontiac

 

bulletForeign Automotive: Alfa Romeo, Audi, BMW, Daihatsu, Eagle, Fiat, Geo, Honda, Hyundai, Isuzu, Mazda, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Saab, Saturn, Subaru, Suzuki, Toyota, Volkswagen, Volvo, Yugo

 

bulletMotorcycle Keys: BMW, Harley-Davidson, Honda, Kawasaki, Suzuki, Triumph, Yamaha

 

bulletPadlock Keys: Abus, Almont, American, Ilco, Master, McKinney, Slaymaker, Squire, WB, Yale

 

bulletLetterbox Keys: Auth, Couch, Eagle, Florence, Keil, L & F, Lyon, National, Yale

 

bulletSafety Deposit Box Keys: Diebold, HHM, Ilco, LeFebure, Miles Osborn, Mosler, S & G, Security, Yale

 

bulletInterchangeable Core: Arrow, Best, Falcon, Corbin-Russwin, Sargent

 

bulletHigh Security Keys: Emhart, Medeco Commercial & Bi-Axial, Assa, Schlage Primus

Tibbe 6 & 8 wafer keys can be cut with an optional vise fixture


The Framon Depth & Space Manual is the core of the Framon #2J. The keys mentioned above are only a portion of those that you will have the capability to cut. The manual contains:

Over 900 cylinder key charts
18 letterbox charts
32 safety deposit box charts

Everything You Need In One Package.....

At Framon, we don't believe in a lot of extras. Here's everything you get when you buy a #2J Code Machine


FC8445	Standard Cutter			F2MS451 6" Dial Caliper
F2MS350	Depth & Space Manual		F2MSSB1	#1 Spacing Block
F2MS552	Spacing Clip			F2MSSB2	#2 Spacing Block
F2MS402	1/8" Allen Wrench			F2MSSB3	#3 Spacing Block
F2SH11/12J Jail Vise				F2MSSB4	#4 Spacing Block
F2SH13/14J Large & Small Stops		F2MSSB5	#5 Spacing Block
DBC1103	.103" Carbide Slotter			F2MSSBJ	Jail Spacing Block
F2MS899	Demonstration Video			LKMS410	Brass Shim
In addition to cutting all of the detention keys, the #2J can still be used to cut almost any cylinder key you'll come across. If detention key cutting is your line of work, the #2J is your machine!

Possibly The Most Perfect Code Machine Ever Created......

All of the extras included with the Framon #2J make it a great package. Here are a few of the features that make it a perfect code machine:

Accuracy: All Framon key machines are hand assembled and hand fit. This ensures that before your machine reaches you, it has originated keys accurate to one-half thousandth of an inch (.0005", about the thickness of a hair). This tolerance assures a perfect key every time!

Bad Key JobStraight-In Feed: The #2J utilizes a straight-in feed approach. The straight-in feed of the #2J provides a perpendicular cut at the root of the key. The flat of the cut will always be the same depth from the left side of the cut to the right. Machines that use a pivot approach can produce keys that turn one way but not the other. The drawing at the right shows the profile of a key cut by a machine that pivots. The different shear lines from the left to the right side of the key lead to the turning problem.

Rugged & Durable: The #2J is made from heat treated aluminum and steel. The carriage moves forward on a pair of steel slides. Spacing and depth movements take place on pairs of steel pins and screws. There are no small gears to strip out and no plastic parts to wear out. We've heard plenty of stories from code machine owners who have dropped the machine off of their workbench and cut a key with no adjustments needed!

 

Cutting Keys By Measurement.....Unequalled Accuracy & Simple To Do

The #2J utilizes actual space & depth information to cut keys. Here's how it's done.....
Mfgr: SchlageDepths
Series: Pin Tumbler0-.335
Blanks: 1045C, etc.1-.320
Cuts Start At: .2312-.305
Spacing: .1563-.290
Block #: 14-.275
Incr.: .0155-.260
No. Of Spaces: 5 or 66-.245
Spaces: .231, .387, .543, .699, .855, 1.0117-.230
 8-.215
 9-.200
SPACING: To cut a key, you need two dimensions: starting cut (distance from the shoulder to the first cut) and spacing (distance between cuts thereafter), both found in the Depth & Space Manual. Shown at the right is the Schlage chart from our Depth & Space Manual. Schlage cylinder keys use .231" starting cut and .156" spacing. Starting cut is set by zeroing the machine and counting out to .231". Once set, the the spacing block with .156" is aligned. Cut to cut spacing is a simple matter of aligning two index marks.
MicrometerDEPTH: Depth settings are made in .001" increments by means of a micrometer. Reading a micrometer is quite simple. The depth micrometer on the #2J is shown to the left. The micrometer depth reading is what gives the #2 its' extreme accuracy. Once familiar with the machine, you'll be code cutting keys in 30-45 seconds.

 

Contact Framon or one of our distributors for more information


FRAMON #2J
Available with 110V AC or 12V DC Motor - no upcharge for 12V
220 V AC Motor available
Dimensions: 10 1/2" W x 16" D x 8" H
Weight: 32 lbs.

Click here for #2J Accessories
Click here to go back to our home page...

This page was last updated

Friday, April 27, 2007

Framon Manufacturing Company, Inc. Alpena, MI 49707