DC-300

Code Machine & Duplicator

To download the DC-300 catalog page click here

The DC-300 Duplicating Code Machine is two machines in one. It can both originate and duplicate automotive keys with ease.

Code cutting a key is a simple process: insert the depth cam and space key into the machine, slide in the blank and begin cutting. It is a simple procedure, done in about 30 seconds.

Duplicating a key is even easier; clamp both key into the vises, turn the machine on and start cutting. Copying a key on the DC-300 takes about 20 seconds.

A highlight of the DC-300 is its' ease of use. Only a few minutes of training is required to familiarize your employees with the features & operation of the DC-300.

Here's just a few of the outstanding features of the DC-300:

	As new code series are introduced, all that is needed is a new space key, in most cases. Occasionally, depending on which depth cams you have with your machine, another depth cam may be required.
	A wire deburring brush is included with the machine. A nylon brush is also available.
	The DC-300 will hold .0005" accuracy consistently - no need to readjust the machine continually!
	The DC-300 has a double sided vise. It will hold almost all automotive keys without any tipping. A pair of brass shims is also included with the machine in the rare case that a key tips.
	The DC9040 cutter supplied with the machine will cut thousands of keys without the need for resharpening when used properly. Please note: the DC-300 is not designed to cut steel keys. This will reduce cutter life significantly.
	Sealed ball bearings are used throughout the machine. These bearings require no maintenance whatsoever. The only maintenance the DC-300 requires is a regular cleaning, and a few drops of oil onto the slide rod and guide.

The purchase price of the DC-300 does not include any depth cams or space keys.